Finishing Polish & One-Step Compounds

Finishing polish: where the gloss comes from

After cutting, paint carries a fine haze and holograms that only show in sunlight. A finishing polish removes them and brings out the depth of the colour. Choose by how much correction is left to do:

• Pro 8000 — a one-step adaptive compound: it cuts first, then finishes as the abrasive breaks down, for moderate defects in a single stage.
• Pro 9500 — an ultra-fine mirror-finish polish for the final stage.
• Pro 8000 SF and Pro 9500 SF — the same jobs, silicone-free, for body shops and coating preparation.
• CernaGlow — a ceramic-infused wax to protect the freshly polished finish.

Technique

Use a soft finishing pad, a few pea-sized drops of polish, moderate speed and light pressure. Work small sections until the polish turns clear, then wipe with a clean microfiber. Check the panel under a strong light before moving on. Our car polishing guide covers machine settings, and the cutting compounds handle deeper defects first.

Can I use a finishing polish by hand?

Yes, for small areas and light haze, though a dual-action machine gives a more even, faster result on whole panels.